CCNA QUIZ 8

CCNA (Cisco Certificated Network Associate), Cisco firmasının kendine ait sertifikalarından biridir. Bu sertifikaya CCNA sınavını geçerek alabilirsiniz.

CCNA QUIZ 8

Question 1
Which ones are the Routed Protocols?
A. EIGRP
B. RIP
C. IPX
D. OSPF
E. IP

Question 2
Which protocols use UDP ports by default?
A. DHCP
B. NTP
C. TFTP
D. SNMP
E. Telnet

Question 3
Which ones are true for simple switches?
A. Used for switching
B. Works on layer 2
C. Used for routing
D. Works on layer 3
E. Smart
Question 4
IP address 172.102.6.7/27 is a part of which host range?
A. 172.102.6.0 – 172.102.6.16
B. 172.102.6.0 – 172.102.6.32
C. 172.102.6.1 – 172.102.6.15
D. 172.102.6.1 – 172.102.6.32
E. 172.102.6.1 – 172.102.6.30

Question 5
To disable Auto Summarization for an EIGRP process, we use … command un der that EIGRP process.
A. auto-summary
B. summarize
C. summarize auto
D. no summarize
E. no auto-summary

Question 6
What is the decimal equivalent of 11110111?
A. 240
B. 252
C. 247
D. 237
E. 248

Question 7
To determine a route which ones are considered?
A. Administrative Distance
B. Metric
C. Prefix-Length
D. Interface Priority
E. MAC Address

Question 8
How can we exclude an IP in a DHCP Pool? (Exclude 172.16.8.7)
A. ip dhcp excluded-address 172.16.8.7
B. ip exclude 172.16.8.7
C. ip excluded-address 172.16.8.7
D. ip exclude 172.16.8.7 dhcp
E. dhcp exclude 172.16.8.7

Question 9
Which ones are WAN Encapsulation protocols?
A. HDLC
B. PPP
C. STP
D. OSPF
E. IP

Question 10
An Active state indicates that a route is reachable, and that EIGRP is fully converged.
A.
False
B.
True

Question 11
Which ones are Link-State Protocols?
A. IS-IS
B. OSPF
C. BGP
D. RIP
E. EIGRP

Question 12
Switches use … to prevent Layer 2 loops.
A. VTP
B. ICMP
C. ARP
D. STP
E. VLAN

Question 13
How can we deny host in the subnet 192.168.5.0/24 in ACL 10?
A. acl 10 deny 192.168.5.0 0.0.0.255
B. access-list 10 permit 192.168.5.0 255.255.255.0
C. access-list 10 deny 192.168.5.0 0.0.0.255
D. acl 10 permit 192.168.5.0 255.255.255.0
E. access-list 10 deny 192.168.5.0 255.0.0.0

Question 14
DNS uses UDP Port …..
A. 88
B. 53
C. 80
D. 50
E. 83

Question 15
Which ones are VTP modes?
A. All of them
B. Host
C. Server
D. Client
E. Transparent

Question 16
Which ones are the router types of OSPF?
A. Backbone Routers
B. All of them
C. ABR
D. Internal Routers
E. ASBR

Question 17
The decimal dotted format of /29 is :
A. 255.255.255.240
B. 255.255.255.224
C. 255.255.255.128
D. 255.255.255.254
E. 255.255.255.248

Question 18
Which one is a Class D address?
A. 192.168.5.7
B. 150.1.8.55
C. 231.87.100.5
D. 10.5.18.148
E. 241.5.8.41

Question 19
OSPF Has three databases. One of them is Topology Database. How can we see OSPF Topology Database?
A. show topology ospf
B. show topology database ospf
C. show ip ospf topology
D. show ospf topology
E. show ip ospf database

Question 20
How can we configure Fast Ethernet 0/1 as Trunk port on a Cisco switch?
A. switchport trunking
B. interface fa0/1
C. interface fa0/1 create
D. switchport mode trunk
E. trunking on

Answers: 1-C,E 2-A,C,D 3-A,B,E 4-E 5-E 6-C 7-C 8-A 9-A,B 10-FALSE 11-A,B 12-D 13-C 14-B 15-C,D,E 16-B 17-E 18-C 19-E 20-B,D

Question 10 Explanation:
A Passive state indicates that a route is reachable, and that EIGRP is fully converged.